Step 1:
After successfully mounting the Frame (if you haven’t, follow this link to find out how), it is time to add your Cassettes. Take your Cassette upright with the cables facing you – with the tab of the RJ45 connector on top to patch to a switch above the PATCHBOX. Or with the RJ45 connector on the bottom if the switch you want to patch to is below your PATCHBOX. Doing this avoids bending the cable. When patching a 24-port switch, flip every second cassette upside down to avoid twisting the cable in the short run.
Step 2:
Slide your Cassette into the Frame until you hear a click sound – this means your Cassette is locked into the Frame.
Step 3:
Fill your Frame with your Cassettes.